Highest performance with highest consistency is the key to success! ... [SHOW MORE]
The product was removed from our offer.

Customers Photos

There are no customer photos. Be the first! Add your photo

Product’s Description

Highest performance with highest consistency is the key to success!

SHAPE DETAILS
Scoop Rocker Line
The bottom curve is designed to glide as low and smooth as possible over the water but still have enough height under the mast track area and at the nose so as not to stick to the water or dive into the upcoming chop.
Outline
Slalom 110, 115 A harmonic mix between the straight outline of the small boards and the more rounded outline of the big boards makes the medium sized shapes extremely versatile in their range of use, resulting in the best performance ratio from all sizes.
Slalom 125, 130, 140  The round outline makes the board both agile and direct, which is important in the light winds for the quickest possible acceleration and to reach top speeds without losing drive in the lulls. The SL 130 and 140 have a wider tail deck outline than the bottom, which helps the rider to have more leverage over the fin, but still, have a narrow enough tail underneath for top speed.
Bottom Shape
Slalom 110, 125 Flat panel Vee in the tail to the mid section for control and speed. The front section has an increasing Vee shape with double concaves and side flats for a smoother ride and to give the rails more height to clear the water whilst fully planing.
Slalom 115, 130, 140  Invert V in the tail which gives more lift for better planing and more acceleration. Flat panel V starts under the front footstrap and runs into an increasing Vee shape with double concaves and side flats for a smoother ride and to give the rails more height to clear the water whilst fully planing.
Deck Shape
S-Deck – Lower back foot, higher front foot and lower mast track allow a comfortable sailing position and outstanding control during cross and down wind reaches.
Slalom 110, 115,125, 130, 140 A flatter deck makes the board responsive to foot pressure for easier and more controlled gybes.
Rail Shape
Nice boxy rails in the tail area for a comfortable foot position in the straps. Boxy rails in the mid section to avoid the water sucking up the deck and to provide flotation throughout and after the jibes. Thin rails in the nose area to reduce weight and gain on reactivity.
Cutouts
Refined rail and tail cutouts which have been gradually calculated in order that every board feels similar and just changes in volume. The smaller tail surface reduces drag and trims the board in a more lateral free gliding position whereas the rail cutout trims the board more to the leeward side which helps to release the upwind water pressure and increases acceleration and top speed.
 Construction
With our additional GET line, we respond to the constant request for a softer construction and offer a more comfortable ride next to our sporty line. Our GBM line is the stiffer and lighter construction using materials with a higher Carbon percentage while our GET line offers more flex and comfort with the softer fiberglass material.

GBM – The full deck Carbon Biax with the full Carbon UD bottom is the construction combination to have a lightest and stiffest board for maximum early planning, acceleration and riding agility.

GET – The full deck Carbon Biax with the full fiberglass bottom is the combination of lightweight, stiffness and flex for early planning, acceleration and control.

http://patrik-windsurf.com/boards-archive/

Customer Ratings

oddaj svoje mnenje
  • There are no customer ratings.